Measuring the new EME setup for 47GHz of @ea3hmj
#moonbounce #EME2020 #GHz_bands #hamradio #hamr https://t.co/tmkGbbLyPh
Category Archives: EB3FRN
New rfgen for the VNA, it needs replace the batery and reload the calibration data. The calibration backup was in a… https://t.co/OfH9WuFlU9
New rfgen for the VNA, it needs replace the batery and reload the calibration data. The calibration backup was in a… https://t.co/OfH9WuFlU9
Next challenge, moonbounce at 47GHz! 🤪 I will try to use the 32GHz DSN feedhorn. #ghz_bands #hamradio #hamr https://t.co/aKn8jcgWSr
Next challenge, moonbounce at 47GHz! 🤪 I will try to use the 32GHz DSN feedhorn. #ghz_bands #hamradio #hamr https://t.co/aKn8jcgWSr
First light of the VNA working at 47GHz! The plot of a @Kuhneelectronic passband filter as DUT. @GHz_bands https://t.co/Cpx85oZlKf
First light of the VNA working at 47GHz! The plot of a @Kuhneelectronic passband filter as DUT. @GHz_bands https://t.co/Cpx85oZlKf
Building a VNA S-Parameter test set for 47 & 76GHz #GHz_bands #RFporn #hamradio #hamr https://t.co/Ekri5HdavP
Building a VNA S-Parameter test set for 47 & 76GHz
#GHz_bands #RFporn #hamradio #hamr https://t.co/Ekri5HdavP
New millimeet again. Today ENR calibration of noise heads up to 47GHz, and S11 and S21 up to 76GHz. Tnx @on7un,… https://t.co/O9AQhCkzxh
New millimeet again. Today ENR calibration of noise heads up to 47GHz, and S11 and S21 up to 76GHz. Tnx @on7un,… https://t.co/O9AQhCkzxh
Summer experiment, how performs a slot antenna at home in 10GHz? No problem for “local” qso at 100km with @ea3hmj… https://t.co/idzpfNSRY2
Summer experiment, how performs a slot antenna at home in 10GHz? No problem for “local” qso at 100km with @ea3hmj… https://t.co/idzpfNSRY2
New 10GHz EME setup with rotary joint to change the polarization. Tnx @ea3hmj for all ;) #ghz_bands #hamradio https://t.co/KZIPOivMyp
New 10GHz EME setup with rotary joint to change the polarization. Tnx @ea3hmj for all 😉 #ghz_bands #hamradio https://t.co/KZIPOivMyp
All ready for tomorrow mount a small microwave lab in the #Mercaham #ea3rch at #cerdanyola #ghz_bands #hamradio https://t.co/mjg2hvK7CN
All ready for tomorrow mount a small microwave lab in the #Mercaham #ea3rch at #cerdanyola #ghz_bands #hamradio https://t.co/mjg2hvK7CN
Measuring the loss at 10GHz of a radome and a 2.4GHz helix, for the #Eshail2 satellite. #qo100 #ghz_bands #hamradio https://t.co/gSwFQHTy3B
Measuring the loss at 10GHz of a radome and a 2.4GHz helix, for the #Eshail2 satellite. #qo100 #ghz_bands #hamradio https://t.co/gSwFQHTy3B
Amazing how fast is a waveguide switch. #ghz_bands #hamradio https://t.co/Z23Yin5uw1
Amazing how fast is a waveguide switch.
#ghz_bands #hamradio https://t.co/Z23Yin5uw1
https://t.co/iVf63wo4jT
New 10GHz moonbounce system to put direct over the arm of my 2.4m offset dish. #ghz_bands #EME #hamradio https://t.co/TRDkPhXvTD
New 10GHz moonbounce system to put direct over the arm of my 2.4m offset dish. #ghz_bands #EME #hamradio https://t.co/TRDkPhXvTD
Today I put the mechanic’s hat. Rebuilding the 10ghz moonbounce system. #ghz_bands #hamradio #eme2020 https://t.co/AkQdDbOxPC
Today I put the mechanic’s hat. Rebuilding the 10ghz moonbounce system. #ghz_bands #hamradio #eme2020 https://t.co/AkQdDbOxPC
New patch antennas for the #Eshail2 arrived from @gobrishan and @HHolsink, thanks for nice pieces. #qo100 #ghz_bands https://t.co/8N4ZJsJKrW
New patch antennas for the #Eshail2 arrived from @gobrishan and @HHolsink, thanks for nice pieces. #qo100 #ghz_bands https://t.co/8N4ZJsJKrW
Full automated antenna radiation pattern measure in the lab, really amazing. @ea3hmj thanks for all! #ghz_bands… https://t.co/CerZmIqd75
Full automated antenna radiation pattern measure in the lab, really amazing. @ea3hmj thanks for all! #ghz_bands… https://t.co/CerZmIqd75
New joint venture with @ea3hmj. We are working to set up a HP 8530A microwave receiver for antenna measurement
New joint venture with @ea3hmj. We are working to set up a HP 8530A microwave receiver for antenna measurement. The antenna under test is a 10GHz wg slot, rotated at hand to plot it. Now we need rotate the antenna automatically and maybe a anechoic chamber! LOL #ghz_bands
Successful RX of the DVB-S2 @qo100_sat beacon using leandvb under linux. #qo100 #heilsat2 #hamradio #hamr https://t.co/M168TVOyej
Successful RX of the DVB-S2 @qo100_sat beacon using leandvb under linux. #qo100 #heilsat2 #hamradio #hamr https://t.co/M168TVOyej
My first light in the @qo100_sat in DVB-S! Using @gnuradio and Adalm Pluto SDR #qo100 #eshail2 #ghz_bands https://t.co/yEPeNgyIZj
My first light in the @qo100_sat in DVB-S! Using @gnuradio and Adalm Pluto SDR #qo100 #eshail2 #ghz_bands https://t.co/yEPeNgyIZj
Trying to power-up a 3x MRF21120 amplifier to use un DVB-S in the #QO100 satellite. #eshail2 #ghz_bands #hamradio https://t.co/JSDN8h8Cz3
Trying to power-up a 3x MRF21120 amplifier to use un DVB-S in the #QO100 satellite. #eshail2 #ghz_bands #hamradio https://t.co/JSDN8h8Cz3